Setting GPRS dan MMS Operator Tri untuk Ponsel Nokia, Soni Ericsson, Samsung dan Motorola

Share

Nokia

GPRS Parameter Setting

1. Masuk ke Menu, click Services > Option > Settings > Default Access Point > Options > New Access point > Use default settings

2. Ganti parameter GPRS yang dibutuhkan seperti yang dijabarkan dibawah ini
Connection name – 3gprs
Data bearer – GPRS
Access point name – 3gprs
User name – 3gprs
Prompt Password – No
Password – 3gprs
Authentication – Normal
Homepage – http://wap.three.co.id
Connection Security – off
Session mode – permanent

3. Press Option > Advanced Setting, Masukkan parameter yang dibutuhkan seperti yang dijabarkan dibawah ini :
Phone IP address – Automatic
Primary name server – 0.0.0.0
Secondary name server – 0.0.0.0
Proxy server address – 10.4.0.10
Proxy port number – 3128

MMS Parameter Setting

1. Go to Menu, click Messages > Option > Settings > Multimedia Messages > Access Point in Use > Options > New Access point > Use default settings

2. Change each MMS parameter to this value:
Connection name – 3mms
Data bearer – GPRS
Access point name – 3mms
User name – 3mms
Prompt Password – No
Password – 3mms
Authentication – Normal
Gateway IP address – 0.0.0.0
Homepage – http://mms.three.co.id

3. Press Option > Advanced Setting, fill in the parameters with these values:
Phone IP address – Automatic
Primary name server – 0.0.0.0
Secondary name server – 0.0.0.0
Proxy server address – 10.4.0.10
Proxy port number – 3128

4. Press Messaging > Options > Setting > Multimedia Message, fill in the default setting with the values below.
Access Point in use: 3mms
Multimedia reception: always on
On receiving message: Retrieve immediately
Allow anonymous messages: yes
Receive adverts: yes
Receive report: yes
Deny report sending: no
Message validity: maximum time
Image size: small
Default speaker: loudspeaker


Sony Ericsson

GPRS Parameter Setting

1. Go to Menu, click Connectivity > Data Comm. > New Account
2. Type in 3GPRS
APN : 3gprs
User Name : 3gprs
Password : 3gprs
Click Save
3. Click Internet setting > WAP profile > New Account
4. Type in 3GPRS
Connect Using : 3GPRS
IP Address : 0.0.0.0
Click Save
5. Click More/ Edit > Setting
Connect using : http
Use proxy : Yes
Proxy : 10.4.0.10
Port : 3128
User Name : 3gprs
Password : 3gprs
Click Save
6. Click Advance
Name : 3GPRS
Address : http://wap.three.co.id
Click Save

MMS Parameter Setting

1. Go to Menu, click Connectivity > Data Comm. > New Account
2. Type in 3mms
APN : 3mms
User name : 3mms
Password : 3mms
Click Save
3. Click Internet setting > WAP profile > New Account
Type in 3mms
Connect Using : 3mms
IP Address : 0.0.0.0
Click Save
4. Pick More/ Edit > Setting
Connect Using : http
Use proxy : Yes
Proxy : 10.4.0.10
Port : 3128
Leave the User Name and Password field blank
Click Save
5. Message Setting: click Message > option > Picture > Picture Message > Option
Validity period: maximum
Delivery report: on
Message server: http://mms.three.co.id
WAP Profile: 3gprs
Click Save


Samsung

GPRS Parameter Setting

1. Go to main menu, click Browser > Profile Setting > Operator (if available)
Type in Profile Name : 3GPRS
Home URL : http://wap.three.co.id
Bearer : GPRS only
Proxy : Disable
2. Click GPRS Setting
Security : Non-secure
Type in DSN 1 : 0.0.0.0
APN : 3gprs
Login ID : 3gprs
Password : 3gprs

MMS Parameter Setting

1. Go to main menu, click Messages > Multimedia Messages > Setting > MMS Profile > Current Profile > Profile Setting > Operator (If Available)
Type in Profile Name : 3mms
Server URL : http://mms.three.co.id
Proxy : Enable
2. Click GPRS Setting
IP Address : 0.0.0.0
APN (3mms)
Password : 3mms
Login name : 3mms
Password : 3mms


Motorola

GPRS Parameter Setting

* On standby mode
1. Go to Menu > Web Access > Select > Web Sessions > Select
2. Click 3GPRS > Menu > Set Default > Select
If the operator list is not available, then

* On standby mode
1. Go to Menu > Web Access > Select > Web Sessions > Select
2. Click New Entry > Select > Entry Detail, fill the parameters with this value:

Name : 3GPRS
Homepage : http://wap.three.co.id
Gateway IP :
Port 1 :
Timeout : 15 minutes
GPRS APN : 3gprs
User Name : 3gprs
Password : 3gprs
(Leave other parameters blank)
Press Done
3. Click 3GPRS > Menu >Set Default > Select

MMS Parameter Setting

* On standby mode
1. Click Message > Menu > Message Setup > Select > MMS Message Setup > Change > Server Info > Select
2. Pick 3MMS > Select
If the operator list is not available, then:

* On standby mode
1. Go to Menu > Web Access > Select > Web Sessions > Select > New Entry > Select > Entry Detail, and fill in the parameters with this value:

Name : 3mms
Homepage : http://mms.three.co.id
Gateway IP : 10.4.0.10
Port 1 : 3128
Timeout : 15 minutes
GPRS APN : 3mms
User Name : 3mms
Password : 3mms
(Leave other parameters blank)
Press Done
2. Click Message > Menu > Message Setup > Select > MMS Message Setup > Change > Server Info > Select
3. Pick one of the available listed items, and press Menu > Edit > Select > Service Name, and OK
4. Type in 3MMS, and OK
5. Click Server Name, and OK
6. Type in http://mms.three.co.id, and OK
7. Pick Session Name, and OK
8. Pick 3MMS that was created at the first step, and Select
9. Press Done

Baca Selengkapnya...

Kode Rahasia Ponsel Motorola

Share

IMEI number:
*#06#
Code to lock keys. Press together *7
Note: [] (pause) means the * key held in until box appears.

Select phone line - (use this to write things below the provider name):
[] [] [] 0 0 8 [] 1 []
Add phonebook to main menu:
[] [] [] 1 0 5 [] 1 []
Add messages to main menu:
[] [] [] 1 0 7 [] 1 []
Copy SIM memory (phonebook menu):
[] [] [] 1 0 8 [] 1 []
Eng Field options (main menu):
[] [] [] 1 1 3 [] 1 []
Slow (Frequency of search menu):
[] [] [] 1 0 1 [] 1 []
Medium (Frequency of search menu):
[] [] [] 1 0 2 [] 1 []
Fast (Frequency of search menu):
[] [] [] 1 0 3 [] 1 []
Enable EFR:
[] [] [] 1 1 9 [] 1 []
Function :
[] [] [] # # # [] 1 []

Change pin:
[] [] [] 0 0 4 [] 1 []
Unblocking using the "puk" number:
[] [] [] 0 0 5 [] 1 []

There are lots of similar codes exist. If you change the last number to 0 you can deactive that code. The 3 digit number at the middle are from 0 to 999. I put the most interesting codes. (EFR):Enhanced Full Rate Codec.

You can change GSM frequencies to 900/1800 by entering the enginnering model. Following the below steps:
enter menu and press 048263* quickly, then you will enter the secret engineering menu
under "Opcode"
input 10*0*3 for GSM 900
10*0*4 for GSM 1800
10*0*5 for GSM 1900
10*0*6 for dual band GSM 900/1800
10*0*7 for dual band GSM 850/1900

To add extra message space 4 your Motorola C350 C450 C550 or C650, press menu button, press 048263* quickly, then on the popup menu enter 47 press ok.press 50 and ok.press 1 ok.press 64 ok.press 1 ok.press 186 and ok.You will receive an extra 50 msgs memory space.Switch phone off and back on.(not tested)
Important!
Try these codes at your own risk! We don't accept any complaints.
Some of these codes may not work.

Baca Selengkapnya...

Setting WAP CDMA-Flexi

Share

NOKIA
Ketik *#2769737#
• Server address > Server 1 > 10.177.7.7:8088
• Server address > Server 2 > 0.0.0.0:0000
SETTING URL
• Tekan tombol 0 agak lama atau Pilih menu Minibrowser
• Biasanya akan muncul error terlebih dahulu
• Pilih menu
• Pilih menu paling bawah advanced
• Pilih menu no. 1 setting
• Pilih menu no. 1 homepage
• Isi dengan http://wap.telkomflexi.com
• Simpan


SANEXTEL
Setting Gateway
- Ketik ##872769737
- Pilih Gateway > Proxy0Addr0 > isikan 10.177.7.7
- Port > check 9201
- Menu - Phone Manage - System - Data Service - PPP Auth
- Enter Lock Code : 0000
- Input ID : wap
- Input PW : wap
Setting URL
- Klik tombol i
- Pilih Start
- Klik tombol kecil samping kiri dibawah volume
- Pilih menu no. 6 Advanced
- Pilih menu no. 2 Homepage
- Klik OK
- Masukkan http:// wap.telkomflexi.com
- Klik Ok


SAMSUNG
Pilih Menu-> Select 2 (Internet/SMS)
Pada menu Internet/SMS-> Select 5 (Internet Setup)
Enter Password (ketikan 0000)
Internet Setup->1 Initial URL http://wap.telkomflexi.com)
Internet Setup->2 Gateway(gw.telkomflexi.com)



SKY- 6100
Menu 5 (pengaturan)
Websetup
Sandi (default "0000)
Proxy addr 10.177.7.7
Init url "http://wap.telkomflexi.com
Simpan


MOTOROLA
ALL
WAP Config Setting :
- Masuk ke MENU
- Tekan angka 6 (Menu Setting)
- Tekan angka 8 (Menu DATA MODE)
- Tekan angka 2 (Menu DATA PROFILE)
- Tekan angka 1 (Menu WAP)
Icon rumah diisi : WAP
Icon pencil diisi : Packet
Icon phone (dial number PDN) diisi : #777
Icon tulisan Cina (username network PDN) diisi : wap
Icon tanda tanya (password network PDN) diisi : wap
Browser Setup
- url default : http://wap.telkomflexi.com
- IP address : 10.177.7.7
- Port : 9201



MOTOROLA V-868
1. Klik internet button (tombol yang berwarna biru)
2. Pilih wap menu, lalu klik OK
3. Pilih browser setup, lalu klik OK
4. Pilih proxy setup, lalu klik OK
5. Pilih profile apa saja selain Uni-Info
6. Pilih homepage (bergambar rumah), lalu klik OK
7. Isi homepage http://wap.telkomflexi.com/, klik OK
8. Pilih 1IP, lalu klik OK
9. Isi 1stIP 10.177.7.7, lalu klik OK
10. Pilih 1Port , lalu klik OK
11. Isi 1Port 9201, lalu klik OK
12. Pilih 2IP, lalu klik OK
13. Pilih 2IP 10.21.5.201, klik OK
14. Pilih 2Port, klik OK
15. Isi 2Port 9200, klik OK
16. Pilih data profile (daftar paling bawah), klik OK
17. Pilih WAP, klik OK
Untuk Setting Data Rate:
1. Klik menu
2. Pilih setting, klik OK
3. Pilih data mode, klik OK
4. Pilih data rate, klik OK
5. Pilih 115200
6. Pilih data profile, klik OK
7. Pilih WAP, klik OK
8. Pilih PACKET untuk tipe koneksi
9. Pilih dial in number(gambar telepon), klik OK
10. Masukan #777, klik OK
11. Pilih user name, masukan wap, klik OK
12. Pilih password, masukan wap, klik OK
Untuk masuk ke WAP portal telkomflexi:
1. Klik internet button (tombol yang berwarna biru)
2. Pilih WAP menu, klik OK
3. Pilih homepage, klik OK
4. Klik CONNECT (tombol kiri atas)
5. Masuk ke wap.telkomflexi.com


VERXION 818
1. Klik menu, klik angka 1 lalu akan muncul browser
2. Klik OK atau klik angka 2
3. Pilih setting, klik OK atau klik angka 2, lalu akan mucul tiga pilihan menu
4. Pilih menu network setting, klik 3G lalu klik OK
5. Pilih gateway setting atau klik angka 2
6. Pilih address 1, klik tanda panah kebawah
7. Isi address dengan 10.177.7.7
8. Isi port dengan 9201, klik set, lalu klik OK
9. Klik clear, kembali ke menu browser
10. Klik angka 1 atau UP Start, lalu klik OK
11. Akan muncul halaman WAP, ketik http://wap.telkomflexi.com

Baca Selengkapnya...

Setting Nam CDMA (tutorial)

Share

SAMSUNG


--------------------------------------------------------------------------------

Samsung sph-n240, n400, a460, a500, etc Nam Programming:

Nam Set: ##Spc

Test Mode: 47*869#1235

Debug Menu: ##33284,ok

Service Menu: Menu+8+0 (#889)

Reset (Life time, Clear Memory, etc): ##786,ok

A-key: ##2539,ok

Label Selection: ##3882,ok

Label(Home, Work, etc) : **523,ok

NGG Setting (Gateway, etc.): ##2769737,ok

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok



Samsung sch-411, 611, n105, a100, a300, a2000, etc Nam Programming:

Nam Set: 47*869#08#9

Nam Set: Menu+60

Test Mode: *759#813580

Test Mode: 5809540*45680

A-key: Menu+0, 25##

External Audio: Menu+0, ####

Debug Menu: Menu+8, 0415 or Spc

Debug Menu: Menu+9, 0415 or Spc

Brief NAM Programing: Menu+40,626 (not all version)

LCD Contrast: Menu+45 (not all version)

SIO Mode: Menu+49

SIO Mode: Menu+69



Samsung a300, a530, etc Nam Programming:

Test Mode: 47*68#13580



Samsung e170, e250, e300, X-series, etc Nam Programming:

Nam Set: 6548#0**4#6

Nam Set: 74153697193

Test Mode: 5809540*45680

Debug Menu: Menu(2sec)+0, 6725 or 9720





TEST MODE COMMANDS:

411_test_mode.txt

811_test_mode.txt

n105_test_mode.txt

n240_test_mode.txt

n260_test_mode.txt

a500_test_mode.txt

a530_test_mode.txt







KYOCERA


--------------------------------------------------------------------------------

Qualcomm qcp-800 Nam Pogramming:

Nam Set: Menu+3+0+Spc

Field Test: Menu+7+0+Fsc



Kyocera 1135, 2255, 3035, 5135, 6035, Se47, etc Nam Programming:

Nam Set: 111111+Jog Dial(Ok), Select "Programming"+Spc

CAI Change: ##7738,ok

Enable TTY: ##889,ok

Life Timer, PRL, etc: ##786,ok

A-key: ##2539,ok

A-key: 2539,ok







SANYO


--------------------------------------------------------------------------------

Sanyo 4900, 5150, 5300, 8100, etc Nam Programming:

Nam Set: ##Spc+Ok+Key Down+Ok

A-key: ##2539+Ok+Key Down+Ok

Version: ##**837+Ok+Key Down+Ok

Debug Menu: ##FSC+Ok+Key Down+Ok

Airtime menu: ##8463+Ok+Key Down+Ok

Change CAI: ##7738+Ok+Key Down+Ok

Vocoder: ##8626337+Ok+Key Down+Ok

Reverse Logistic: ##786+Ok+Key Down+Ok

Set IP Address: ##2769737+Ok+Key Down+Ok

TTY On/Off: ##889+Ok+Key Down+Ok

Advanced Data: ##3282+Ok+Key Down+Ok+Msl

Ready Link: ##4636+Ok+Key Down+Ok

Browser Init On/Off: ##4682+Ok+Key Down+Ok

Picture Token: ##25327+Ok+Key Down+Ok

Unknown Code: ##5282277+Ok+Key Down+Ok

(SPC=000000, FSC=040793)



Sanyo scp-A011, smp-A017 Nam Programming:

Nam Set: F9(3 beep) + 0*72696#767







NOKIA


--------------------------------------------------------------------------------

Nokia 3280, 3285, 3580, 3585, 5185, 6185, 8280, etc Nam Programming:

Nam Set: *3001#12345#

Software Version: *#837#

Software Version: *#9999#

Esn Number: *#92772689#

Restart Phone: *#75681#

Restart Phone: *#75682#



Nokia 8887 Nam Programming:

Nam Set: *3001#12345#

Version: *#0000#

Evrc: *#8378#

Esn/Data/Timer: *#92772689#

SID: *#743#



Nokia 8587 Nam Programming:

Nam Set: *#626#7764726#

Version: *#0000#

Vocoder: *#3872#

Debug Screen: *#8378#

Debug: *#8380#

Field Test Menu: *#83788#



SPC Unlock, Factory Reset:

Full Factory Reset: *#7370#

Resets all settings including non-user changeable items (like SPC)





NOKIA TEST MODE:



51xx, 61xx, 71xx, 3285, 63xx, etc:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 0 0 and then choose OK.



3360, 6360:

1) Turn on the phone. Press *3001#12345#

2) Scroll up to where it says "Field Test" and choose SELECT

3) Highlight "Enable" and choose OK. Turn the phone off then back on.

4) If the test mode screen does not show up press MENU and scroll

down to "Field Test" choose SELECT. Press 2 1 0 1 then choose OK.

5) Lower left or upper left number is the signal strength.

6) To turn off the test mode press MENU and scroll down to where it says

"Field Test" choose SELECT. Press 2 1 0 0 and then choose OK.







AUDIOVOX


--------------------------------------------------------------------------------

Audiovox 4000, 9000, 9100, 9155, 9500, etc Nam Programming:

(Power the phone on and wait until the little light on top goes out)

Nam Set: 289+fcn+#+1

Service menu: fcn+00+fsc(000000)

Test Mode: Hold (2,*,Rcl)+Power



Test Mode Commands:

99 - download - flash phone
124 - inam data write
125 - version
126 - esn read
127 - sec_code
128 - lock_code

129 - is WFTV data write
137 - FSC code
138 - NPcode (nam program code)
139 - dscode
141 - restart
218 - Read_Addr
000 - is cdma mode
001 - is fm mode
002 - is pcs mode
008 - is reg read addr
020 - is lna_range



Audiovox pcx-3500xl Nam Programming:

Nam Set: ##2726+Send+1998+1+Spc+1



Audiovox cdm-100, 130, 135, 8300, 8600, etc Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc



Audiovox-107 Nam Programming:

Nam Set: 45680*47*869#1



Audiovox 9950 Nam Programming:

Nam Set: ##3282





AUDIOVOX TEST MODE:



9100, 9155:

1) Turn on the phone. As soon the phone comes on and the green light

turns off press RIGHTARROW, 0, 0. The phone will ask for the

"FSC Code", press 000000 then choose OK and press RIGHTARROW,

RIGHTARROW. Your phone is now in test mode.

2) The signal strength is the number on the top right hand side of the screen.

3) To turn off test mode shut of the phone and then turn it back on.







MOTOROLA


--------------------------------------------------------------------------------

Motorola 7760, 7860, 2260, 8160, etc Nam Programming:

Nam Set: Fcn,0000000000000, Rcl

Test Mode: Fcn, 00**83786633, Sto



Motorola v60c, v120c etc Nam Programming:

Nam Set: 74663#, Menu, Menu, Spc

Test Mode: Menu, 073887*, Spc

Debug Mode: ##33284



Force the phone into DIGITAL ONLY mode:

1) ##33284 (Debug)

2) RIGHT Softkey (Next) Twice

3) Down arrow 10 times to "PrefMod"

4) RIGHT Softkey (Change) until you see "DigOnly"

5) LEFT softkey (Exit)

6) MENU then LEFT Softkey return to idle screen

7) ##33284 (The last 4 will not display if you have done it correctly)





Motorola v710, v730, v740, ms150, etc Nam Programming:

Nam Set: 8378*# + press 3 times NATE (spc - 071082)

Test Mode: Menu, 073887*, Spc

Service Menu: #758353266#646#



Motorola mc200, mc230, etc Nam Programming:

Nam Set: 5759789*# (spc - 915037)





MOTOROLA TEST MODE:



v60, c120, c331, etc:

1) Turn on the phone. Press MENU 0 7 3 8 8 7 *

2) The phone will require you to "Enter a Security Code", press 000000, OK

3) Scroll down to "Test mode" choose SELECT. Scroll down to "Enable"

choose SELECT. Your phone is now in test mode.

4) Signal strength is the 3_rd number down on the left hand side of the screen.

5) To toggle between regular mode and test mode: Press MODE then

quickly press the BUTTON DIRECTLY TO THE LEFT OF MENU.

6) To turn off the test mode the phone must be in regular mode, then follow

the above sequence and scroll down to where it says "DISABLE" instead of

"ENABLE" and choose select.



Motorola Bible - bible.txt







LG


--------------------------------------------------------------------------------

lgc-300, etc Nam Programming:

Nam Set: Menu, 9, Spc

A-key: Press "Sto" 3sec, 2539**



lgc-330w, etc Nam Programming:

Nam Set: Menu, 4, 0, Spc

A-key: 2539**



lgc-510, v111, etc Nam Programming:

Nam Set: Menu, 3, 0, Spc

A-key: 2539**



lgc-500, 800w, etc Nam Programming:

Nam Set: Menu, 9 , 0, Spc

Debug Mode: Menu, 7, 0, Fsc

Debug Mode: Menu, 8, 0, Fsc

A-key: 2539**



Lg LX,VX-series Nam Programming:

Nam Set: ##Spc

Advanced Settings: ##2342

Vocoder: ##8626337,ok

CAI Change: ##7738,ok

Enable TTY: ##889,ok

A-key: ##2539,ok

Reset (Life time, Clear Memory, etc): ##786,ok







SK TELETECH


--------------------------------------------------------------------------------

Sky All Models Nam Programming:

Nam Set: #7583538324#626#

Test Mode: #7583538324#8378#

Service Menu: Menu+4+0+Spc

Service Menu: Menu+5+0+Spc







WITHUS


--------------------------------------------------------------------------------

Withus wce-100, 200, 300, etc Nam Programming:

Nam Set: ##948487+Save

Nam Set: ##948482+Save

wce-200 ESN write: ##66835+Save

(At the first programming)







HYUNDAI


--------------------------------------------------------------------------------

Hyundai hwp-110 Nam Programming:

Nam Set: #86904**89397#

DM Mode: ##2740*

(Open phone, inter code, close phone)



Hyundai hgc-120, 130, 200 Nam Programming:

Nam Set: #86904**89397#



Hyundai hgc-310, 600, 610 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code



Hyundai Curitel h-100, 150, hx-510b, 520 Nam Programming:

Nam Set: ##20022002+Pwr+1+Spc Code

Field Test: ##20022002+Pwr+1+Master Code



A-key: 2539**

Debug Menu: ##27732726+Pwr

Sar Test: ##27752345+Pwr

Baud Rate: ##36**+Pwr

DM Mode Enable: **1004+Pwr

DS Mode Enable: **1005+Pwr

Test Bell/Voice/Led/Dot: ##1122+Pwr

RF Mode: ##2240+Pwr

Ras Ram: ##2774+Pwr

Cmux1: **0481+Pwr

Cmux2: **0482+Pwr

RX Mode Fax: **0492+Pwr

RX Mode Data: **0491+Pwr

RX Mode Reset: **0490+Pwr







HUAWEI


--------------------------------------------------------------------------------

Huawei ETS-668, 678, 688, etc Nam Programming:

Debug Mode: ##44+Menu

Debug Screen: ##33+Menu

CDG2 Test enable: ##234+Menu

CDG2 Test disable: ##432+Menu

China Lang Select: ##123+Menu

Blocking Debug Code: ###888+Menu

Home System Only On: ##461+Menu

Home System Only Off: ##460+Menu







ERICSSON


--------------------------------------------------------------------------------

Ericsson A1228c, T61, etc Nam Programming:

Short NAM: 987+Menu

Long NAM: 923885+Menu+Spc

CDMA Mode: 904093+Menu

Analog Mode: 904095+Menu

QNC: 904097+Menu

Debug Screen: 904090+Menu

DM Mode: 904050+Menu



Sony-Ericsson T608 Nam Programming:

Nam Set: 923885, Joystick to the right, 111111







EPSILON


--------------------------------------------------------------------------------

Epsilon vc-5x Nam Programming:

Nam Set: **147258963##

Programming1: **1232580##

Programming2: **321456987##

Version: **1470963##

Debug: **000000##

Menu_1: **078987##

Menu_2: **1234756##

A-key: 2539**

Reset: **14789##







GIGA TELECOM

--------------------------------------------------------------------------------

Z510, Z710i(gcd-456) Nam Programming:

Nam Set: Menu+0+Spc







AnyDATA


--------------------------------------------------------------------------------

AMC450 Nam Programming:

Nam Set: *74269#*748#96148063+SEL







GTRAN


--------------------------------------------------------------------------------

Gtran gcp-2000 Nam Programming:

Nam Set: 01#737+Spc

Debug Menu: 01#324+Spc

Debug Mode: 01#727

Test Mode: 01#764+Spc

System Test Mode: 01#768+Spc



Gtran gcp-5000 Nam Programming:

Debug Mode: 01#727+Spc

Test Mode: 01#765







PANASONIC


--------------------------------------------------------------------------------

PANASONIC TEST MODE:



Panasonic (Most):

1) Turn on the phone. Press #7764726# choose SEND

2) Scroll down to where it says "NAM 1" and choose OK. Scroll down

to "Access To Level 4" choose YES. Scroll down to "Built-In-Monitor"

and choose EDIT.

3) Press 1 and choose OK then choose BACK. The phone will say

"Back To Level 1" choose YES. Now choose EXIT the phone will ask you

"Exit And Save Change" choose YES.

4) Signal strength is the top right number on the screen.

5) To turn off the test mode follow the above sequence except press 0

instead of 1 at the "Built-In-Monitor"







SYNERTEK

--------------------------------------------------------------------------------

Synertec S200 Nam Programming:

Nam Set: Menu+0+Spc

Debug Mode:

Test vibro/rx/tx: ##5555+Save

Debug Screen: ##33+Save

Debug Screen: ##523+Save

RF Test: ####+Save

Unknown code: ##325+Save







SONY


--------------------------------------------------------------------------------

Sony CM-M1300, 3300, Z200 Nam Programming:

Nam Set: 111111+Ok(Jog Dial)+Select+Programming+Ok+Spc

audiovox thera 2032
buka watcher, buka keyboard
ctrl d
##debug
buka advance, modem configuration
nozirevpst
000000

ZTE angel
#983*9062
000000

sanex 7080
menu 0
570268
untuk pake starone enable PRL
untuk pake pleki disable PRL

Baca Selengkapnya...